DTF PRESSING INSTRUCTION

DTF PRESSING INSTRUCTION

HEAT PRESS TEMP:

310 DEGREES -  MEDIUM PRESSURE (please see note at end of instructions)

1. PRE-PRESS GARMENT FOR 5-10 SECONDS TO REMOVE MOISTURE & WRINKLES

2.  PLACE TRANSFER ON GARMENT AND PRESS FOR 15 SECONDS.

3. REMOVE FILM AFTER IT IS COMPLETELY COOL
NOTE: PEEL LOW AND SLOW - DO NOT PEEL STRAIGHT UP TOWARDS THE CEILING.  PEEL CAREFULLY AND SLOW. 

4. COVER WITH A COTTON CLOTH (AN OLD T-SHIRT WORKS WELL) AND PRESS FOR 5-10 SECONDS. 

CARE INSTRUCTIONS - AVOID HIGH HEAT - WASH ON COLD, TUMBLE DRY ON LOW - HANG UP OR FOLD RIGHT AFTER REMOVING FROM DRYER. DO NOT IRON!  DTF GETS SOFTER WITH EACH WASH.  IF CARED FOR PROPERLY, IT WILL OUTLAST THE T-SHIRT.  
CARE INSTRUCTION CARDS AVAILABLE TO GIVE YOUR CUSTOMERS

Please Note: All Heat Presses are not the same.  Temperature, press time and/or pressure may vary. One or more of these may need to be adjusted if you are having trouble with your transfers adhering or peeling. If you need further assistance with this, please email us.