Party In The USA Truck (RTP- Ready to Print)

This listing is for a DTF Transfer for only!! 

DTF PRESSING INSTRUCTION

HEAT PRESS TEMP:

310 DEGREES -  MEDIUM PRESSURE (please see note at end of instructions)

1. PRE-PRESS GARMENT FOR 5-10 SECONDS TO REMOVE MOISTURE & WRINKLES

2.  PLACE TRANSFER ON GARMENT AND PRESS FOR 15 SECONDS.

3. REMOVE FILM AFTER IT IS COMPLETELY COOL
NOTE: PEEL LOW AND SLOW - DO NOT PEEL STRAIGHT UP TOWARDS THE CEILING.  PEEL CAREFULLY AND SLOW. 

4. COVER WITH A COTTON CLOTH (AN OLD T-SHIRT WORKS WELL) AND PRESS FOR 5 SECONDS. 

CARE INSTRUCTIONS - WASH ON COLD, HEAT ON LOW - HANG UP OR FOLD RIGHT AFTER REMOVING FROM DRYER.  DTF GETS SOFTER WITH EACH WASH.  IF CARED FOR PROPERLY, IT WILL OUTLAST THE T-SHIRT   
CARE INSTRUCTION CARDS AVAILABLE TO GIVE YOUR CUSTOMERS

Please Note: All Heat Presses are not the same.  Temperature, press time and/or pressure may vary. One or more of these may need to be adjusted if you are having trouble with your transfers adhering or peeling. If you need further assistance with this, please email us.